Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning and hacking by using the first aftermarket CAN-Immobiliser. With the added option of connecting to a Ghost app and GPS tracking system that can send you alerts to call if your car is tampered with or stolen.
Installing a Ghost immobiliser is a breeze for a skilled technician. Having the right tools, insulation tape and heat shrink tubing are essential.
Getting Started
Ghost immobilisers are a great alternative to physical theft devices such as wheel locks and car alarms. They protect your vehicle without using LED indicators or key fobs. They connect directly to the ECU CAN data network, and are activated only by entering a PIN code. This provides a much more secure level of security against key hacking, cloning, and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham has to be done with a high degree of agility and precision. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's electrical circuits. To avoid this, it's vital that you understand the installation process and prepare your vehicle appropriately.
It is necessary to remove interior panels from the vehicle to make space for your immobiliser. Once you've found the perfect location to hide it and secure it using cable ties to prevent it from being removed or tampered with. Next, tidy up the wiring by tying down loose wires, and then using insulation tape or heat shrink tubing to cover exposed connections. This will reduce the risk of a short circuit that is not intended to happen and improve the appearance and reducing the risk of theft.
Finally, identify ghost 2 immobiliser problems of constant 12V power and a grounding point for the ghost immobiliser. Once you have found them, test the power cables with a multimeter. Then, connect the CAN H and CAN L wires from the immobiliser to the designated power source and the grounding point.
It's important that you double-check all the connections and check the immobiliser to check for indications of corrosion. The process of entering a PIN and launching the vehicle is a great method to test the system. This should be a regular part of your daily routine, as it will allow you to detect any intermittent problems early. Regular testing will help extend the life of your device and ensure it is running at its peak.
Preparing your vehicle
The installation of an Ghost immobiliser is a complicated task that requires tools and understanding. A wiring diagram of the vehicle is essential for locating the correct wires and making accurate connections, while a multimeter can be used to verify the electrical value and ensure safety. Insulation tape and cable tie can be used to secure the connections and prevent being tampered with. A user's manual is available for the Ghost Immobiliser. It will give you specific instructions tailored to that model.
Once installed, a ghost immobiliser can stop unauthorised engine starts by requiring that the owner enter a unique PIN sequence by pressing buttons on the steering wheel or on the centre console. This can be done manually or remotely using an app for mobile phones, and the code can easily be modified by the vehicle's owner at anytime. The device also operates silently and is unnoticeable to thieves as it doesn't emit radio frequencies.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and stops the engine from starting when it detects a false signal. The system is weatherproof and tamper-proof. It has no keys or LED indicators to draw the attention of thieves.
It can be mounted behind the dashboard or in a hidden area, so that it isn't seen by thieves and does not hinder the vehicle's performance. It can be mounted in a small container, so it is less likely to be spotted by fraudulent salespeople when they test drive.
Its discrete operation and integration with the vehicle's CAN bus system make it a powerful deterrent to modern methods of car theft, like key cloning and signal relay attacks. Combining the system with other security measures will create an effective barrier that can deter even the most persistent of thieves. This is why more and more insurance companies are advocating or even requiring ghost immobilisers be installed, since it can significantly reduce monthly premiums.
Making Connections
Contrary to traditional security systems which are heard by thieves, ghost immobilisers work silently to keep them from being aware that your vehicle has been switched on. They also stop high tech methods of theft, such as OBD hacking. They can also be fitted without causing permanent damage to your car making them a good option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable solutions for preventing car theft. It disables your engine using the CAN data network and generates a unique PIN code which is difficult to steal from criminals to guess. It can be used in various vehicles, and works with many features already installed like car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you choose to install an Ghost immobiliser, be sure to check the wiring diagram for your particular vehicle model to determine the wires to connect. Verify their positions to make sure they are correct, and then label them or tape them to help remember them. You'll also need to locate a constant power source (12V) for the system, as well as a grounding. Once you have these in place, you can begin to make the connections needed to complete the installation.
The ghost immobiliser will not allow your vehicle to start until you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU hacking or key cloning and other methods of theft. Additionally, it can be used in conjunction with other Thatcham-approved security accessories, such as alarms and tyre clamps, to give your car an additional level of protection.
As the UK automotive aftermarket industry grows and expand, so do the options to secure your vehicle. There are a myriad of ways that thieves can get into your car and steal it, so it's important to do all you can to ensure that it isn't stolen. Ghost immobilisers have become a popular choice among car owners who are responsible.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using the CAN network. This stops the engine from starting until the PIN code is entered. This makes it very difficult for thieves to steal your key fob to open your vehicle, and more difficult to disable the system through hacking its electronics.
car stolen with ghost immobiliser are also able to be used together with GPS tracking devices, which can help you track your vehicle and locate it in the event of theft. This feature is not a common option for security products that are available from the market however it's a great option to increase your security and provide peace of mind knowing your vehicle is always secure.
The Ghost-II immobiliser is not just a source of enhanced security but also provides a more convenient experience for the user by eliminating the need to use additional key fobs or devices. It has an easy and intuitive PIN code entry system that integrates seamlessly into your everyday routine. In addition, it offers modes of deactivation and other features that let you temporarily disable the immobiliser to allow valet parking or servicing.
Get the tools you require and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will give you the ability to make precise connections, while a multimeter will help determine electrical values. Insulation tape and heat shrink tubing are crucial for securing connections from short circuits and cable tie is a great way to keep the wiring in the correct position. It's also important to work in a space that is well-lit and wear safety equipment when working with electrical components and tools.
After you've completed the installation, you must test the Ghost immobiliser to verify that it's working properly. First, you should try to start the vehicle without entering the PIN code. If this fails, you'll have to test the system again and conduct a more thorough examination of the connections.
Unlike other security systems that are available, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is more effective than traditional physical deterrents, such as wheel clamps or steering locks. It is TASSA-approved and recognized by some insurance companies. This makes it a cost effective investment that will give you the peace of heart you deserve.